PHOTOBIO PHOTO•LOC Control Cable Kit, 0-10V (White)

8′ PHOTO•LOC 0-10V Communication cable kit provides the ability to send low voltage signal to a fixture to control light output and photo-period when used with controller.  Water and dust resistant push lock IP connectors. 
 
Contains:

• (2) 8′ PHOTO•LOC 0-10V cables (2 Pin)
• (1) TEE Connector (2 Pin)

NOTE: PHOTO•LOC Control cable kit PTBCC8820W applies to PTB7680LS4, PTB9340LS4, PTB3300LS4, PTB7600LS4, PTB5600LS4, PTB3300LS1, PTB7600LS1, and PTB5600LS1 fixtures. The PHOTO•LOC Control cable accessory PTBCC8820W can also be used as an extension link by simply removing the Tee connection for the newer PHOTOBIO•MX PTB7680LS4X, PTB5680LS4X, and PTB3330LS4X.  For newer PHOTOBIO•MX, TX, and T, please reference the PHOTO•LOC kit PTBCC8850W for use as your control cable kit which is included with fixtures.